Class ServiceClient

  • Direct Known Subclasses:
    MexClient, RPCServiceClient

    public class ServiceClient
    extends Object
    Client access to a service. Each instance of this class is associated with a particular AxisService, and the methods support operations using that service. Note that these instances are not intended to be thread-safe. Options instances are used to configure various aspects of the service access.
    • Field Detail

      • log

        protected static final org.apache.commons.logging.Log log
      • ANON_SERVICE

        public static final String ANON_SERVICE
        Base name used for a service created without an existing configuration.
        See Also:
        Constant Field Values
      • AUTO_OPERATION_CLEANUP

        public static final String AUTO_OPERATION_CLEANUP
        Option property name for automatically cleaning up old OperationContexts
        See Also:
        Constant Field Values
      • ANON_OUT_ONLY_OP

        public static final QName ANON_OUT_ONLY_OP
        Operation name used for an anonymous out-only operation (meaning we send a message with no response allowed from the service, equivalent to a WSDL In-Only operation).
      • ANON_ROBUST_OUT_ONLY_OP

        public static final QName ANON_ROBUST_OUT_ONLY_OP
        Operation name used for an anonymous robust-out-only operation (meaning we send a message, with the only possible response a fault, equivalent to a WSDL Robust-In-Only operation).
      • ANON_OUT_IN_OP

        public static final QName ANON_OUT_IN_OP
        Operation name used for an anonymous in-out operation (meaning we sent a message and receive a response, equivalent to a WSDL In-Out operation).
    • Constructor Detail

      • ServiceClient

        public ServiceClient​(ConfigurationContext configContext,
                             AxisService axisService)
                      throws AxisFault
        Create a service client configured to work with a specific AxisService. If this service is already in the world that's handed in (in the form of a ConfigurationContext) then I will happily work in it. If not I will create a small little virtual world and live there.
        Parameters:
        configContext - The configuration context under which this service lives (may be null, in which case a new local one will be created)
        axisService - The service for which this is the client (may be null, in which case an anonymous service will be created)
        Throws:
        AxisFault - if something goes wrong while creating a config context (if needed)
      • ServiceClient

        public ServiceClient​(ConfigurationContext configContext,
                             javax.wsdl.Definition wsdl4jDefinition,
                             QName wsdlServiceName,
                             String portName)
                      throws AxisFault
        This is WSDL4J based constructor to configure the Service Client/ TODO: make this policy aware
        Parameters:
        configContext - active ConfigurationContext
        wsdl4jDefinition - the WSDL we're going to be using to configure ourselves
        wsdlServiceName - QName of the WSDL service we'd like to access
        portName - name of the WSDL port we'd like to access
        Throws:
        AxisFault - in case of error
      • ServiceClient

        public ServiceClient​(ConfigurationContext configContext,
                             URL wsdlURL,
                             QName wsdlServiceName,
                             String portName)
                      throws AxisFault
        Create a service client for WSDL service identified by the QName of the wsdl:service element in a WSDL document.
        Parameters:
        configContext - The configuration context under which this service lives (may be null, in which case a new local one will be created) *
        wsdlURL - The URL of the WSDL document to read
        wsdlServiceName - The QName of the WSDL service in the WSDL document to create a client for
        portName - The name of the WSDL 1.1 port to create a client for. May be null (if WSDL 2.0 is used or if only one port is there). .
        Throws:
        AxisFault - if something goes wrong while creating a config context (if needed)
      • ServiceClient

        public ServiceClient()
                      throws AxisFault
        Create a service client by assuming an anonymous service and any other necessary information.
        Throws:
        AxisFault - in case of error
    • Method Detail

      • getAxisConfiguration

        public AxisConfiguration getAxisConfiguration()
        Get the AxisConfiguration
        Returns:
        the AxisConfiguration associated with the client.
      • getAxisService

        public AxisService getAxisService()
        Return the AxisService this is a client for. This is primarily useful when the AxisService is created anonymously or from WSDL as otherwise the user had the AxisService to start with.
        Returns:
        the axisService
      • setOptions

        public void setOptions​(Options options)
        Set the basic client configuration related to this service interaction.
        Parameters:
        options - (non-null)
      • getOptions

        public Options getOptions()
        Get the basic client configuration from this service interaction.
        Returns:
        options
      • setOverrideOptions

        public void setOverrideOptions​(Options overrideOptions)
        Set a client configuration to override the normal options used by an operation client. Any values set in this configuration will be used for each client, with the standard values for the client still used for any values not set in the override configuration.
        Parameters:
        overrideOptions - the Options to use
      • getOverrideOptions

        public Options getOverrideOptions()
        Get the client configuration used to override the normal options set by an operation client.
        Returns:
        override options
      • engageModule

        public void engageModule​(String moduleName)
                          throws AxisFault
        Engage a module for this service client.
        Parameters:
        moduleName - name of the module to engage
        Throws:
        AxisFault - if something goes wrong
      • disengageModule

        public void disengageModule​(String moduleName)
        Disengage a module for this service client
        Parameters:
        moduleName - name of Module to disengage
      • addHeader

        public void addHeader​(OMElement header)
        Add an arbitrary XML element as a header to be sent with outgoing messages.
        Parameters:
        header - header to be sent (non-null)
      • addHeader

        public void addHeader​(SOAPHeaderBlock header)
        Add SOAP Header to be sent with outgoing messages.
        Parameters:
        header - header to be sent (non-null)
      • removeHeaders

        public void removeHeaders()
        Remove all headers for outgoing message.
      • addStringHeader

        public void addStringHeader​(QName headerName,
                                    String headerText)
                             throws AxisFault
        Add a simple header containing some text to be sent with interactions.
        Parameters:
        headerName - name of header to add
        headerText - text content for header
        Throws:
        AxisFault - in case of error
      • sendRobust

        public void sendRobust​(OMElement elem)
                        throws AxisFault
        Directly invoke an anonymous operation with a Robust In-Only MEP. This method just sends your supplied XML and possibly receives a fault. For more control, you can instead create a client for the operation and use that client to execute the send.
        Parameters:
        elem - XML to send
        Throws:
        AxisFault - if something goes wrong while sending, or if a fault is received in response (per the Robust In-Only MEP).
        See Also:
        createClient(QName)
      • sendRobust

        public void sendRobust​(QName operation,
                               OMElement elem)
                        throws AxisFault
        Directly invoke a named operation with a Robust In-Only MEP. This method just sends your supplied XML and possibly receives a fault. For more control, you can instead create a client for the operation and use that client to execute the send.
        Parameters:
        operation - name of operation to be invoked (non-null)
        elem - XML to send
        Throws:
        AxisFault - if something goes wrong while sending it or if a fault is received in response (per the Robust In-Only MEP).
        See Also:
        createClient(QName)
      • fireAndForget

        public void fireAndForget​(OMElement elem)
                           throws AxisFault
        Directly invoke an anonymous operation with an In-Only MEP. This method just sends your supplied XML without the possibility of any response from the service (even an error - though you can still get client-side errors such as "Host not found"). For more control, you can instead create a client for the operation and use that client to execute the send.
        Parameters:
        elem - XML to send
        Throws:
        AxisFault - ff something goes wrong trying to send the XML
        See Also:
        createClient(QName)
      • fireAndForget

        public void fireAndForget​(QName operation,
                                  OMElement elem)
                           throws AxisFault
        Directly invoke a named operation with an In-Only MEP. This method just sends your supplied XML without the possibility of any response from the service (even an error - though you can still get client-side errors such as "Host not found"). For more control, you can instead create a client for the operation and use that client to execute the send.
        Parameters:
        operation - name of operation to be invoked (non-null)
        elem - XML to send
        Throws:
        AxisFault - if something goes wrong trying to send the XML
        See Also:
        createClient(QName)
      • sendReceive

        public OMElement sendReceive​(OMElement elem)
                              throws AxisFault
        Directly invoke an anonymous operation with an In-Out MEP. This method sends your supplied XML and receives a response. For more control, you can instead create a client for the operation and use that client to execute the exchange.

        Unless the callTransportCleanup property on the Options object has been set to true, the caller must invoke cleanupTransport() after processing the response.

        Parameters:
        elem - the data to send (becomes the content of SOAP body)
        Returns:
        response
        Throws:
        AxisFault - in case of error
        See Also:
        createClient(QName), cleanupTransport()
      • sendReceive

        public OMElement sendReceive​(QName operationQName,
                                     OMElement xmlPayload)
                              throws AxisFault
        Directly invoke a named operationQName with an In-Out MEP. This method sends your supplied XML and receives a response. For more control, you can instead create a client for the operationQName and use that client to execute the exchange.

        Unless the callTransportCleanup property on the Options object has been set to true, the caller must invoke cleanupTransport() after processing the response.

        Parameters:
        operationQName - name of operationQName to be invoked (non-null)
        xmlPayload - the data to send (becomes the content of SOAP body)
        Returns:
        response OMElement
        Throws:
        AxisFault - in case of error
        See Also:
        cleanupTransport()
      • sendReceiveNonBlocking

        public void sendReceiveNonBlocking​(OMElement elem,
                                           AxisCallback callback)
                                    throws AxisFault
        Directly invoke an anonymous operation with an In-Out MEP without waiting for a response. This method sends your supplied XML with response notification to your callback handler. For more control, you can instead create a client for the operation and use that client to execute the exchange.
        Parameters:
        elem - the data to send (becomes the content of SOAP body)
        callback - a Callback which will be notified upon completion
        Throws:
        AxisFault - in case of error
        See Also:
        createClient(QName)
      • sendReceiveNonBlocking

        public void sendReceiveNonBlocking​(QName operation,
                                           OMElement elem,
                                           AxisCallback callback)
                                    throws AxisFault
        Directly invoke a named operation with an In-Out MEP without waiting for a response. This method sends your supplied XML with response notification to your callback handler. For more control, you can instead create a client for the operation and use that client to execute the exchange.
        Parameters:
        operation - name of operation to be invoked (non-null)
        elem - the data to send (becomes the content of SOAP body)
        callback - a Callback which will be notified upon completion
        Throws:
        AxisFault - in case of error
        See Also:
        createClient(QName)
      • createClient

        public OperationClient createClient​(QName operationQName)
                                     throws AxisFault
        Create an operation client with the appropriate message exchange pattern (MEP). This method creates a full-function MEP client which can be used to exchange messages for a specific operation. It configures the constructed operation client to use the current normal and override options. This method is used internally, and also by generated client stub code.
        Parameters:
        operationQName - qualified name of operation (local name is operation name, namespace URI is just the empty string)
        Returns:
        client configured to talk to the given operation
        Throws:
        AxisFault - if the operation is not found
      • addHeadersToEnvelope

        public void addHeadersToEnvelope​(SOAPEnvelope envelope)
        Add all configured headers to a SOAP envelope.
        Parameters:
        envelope - the SOAPEnvelope in which to write the headers
      • getMyEPR

        public EndpointReference getMyEPR​(String transport)
                                   throws AxisFault
        Get the endpoint reference for this client using a particular transport.
        Parameters:
        transport - transport name (non-null)
        Returns:
        local endpoint
        Throws:
        AxisFault - in case of error
      • getTargetEPR

        public EndpointReference getTargetEPR()
        Get the endpoint reference for the service.
        Returns:
        service endpoint
      • setTargetEPR

        public void setTargetEPR​(EndpointReference targetEpr)
        Set the endpoint reference for the service.
        Parameters:
        targetEpr - the EPR this ServiceClient should target
      • getLastOperationContext

        public OperationContext getLastOperationContext()
        Gets the last OperationContext
        Returns:
        the last OperationContext that was invoked by this ServiceClient
      • getServiceContext

        public ServiceContext getServiceContext()
        Get the service context.
        Returns:
        context
      • cleanup

        public void cleanup()
                     throws AxisFault
        Clean up configuration created with this client. Call this method when you're done using the client, in order to discard any associated resources.
        Throws:
        AxisFault - in case of error
      • cleanupTransport

        public void cleanupTransport()
                              throws AxisFault
        Release resources allocated by the transport during the last service invocation. This method will call org.apache.axis2.transport.TransportSender#cleanup(MessageContext) on the transport sender used during that invocation.

        If the callTransportCleanup property on the Options object is set to false (which is the default), then this method must be called after each invocation of an operation with an in-out MEP, but not before the response from that operation has been completely processed (or OMSerializable.build() has been called on the response element).

        If the callTransportCleanup property is set to true, then this method is called automatically. Note that in this case, OMSerializable.build() will be called on the response element before is returned. This effectively disables deferred parsing of the response and prevents the code from starting to process the response before it has been completely received. Therefore this approach is not recommended whenever performance is important.

        Throws:
        AxisFault
      • setAxisService

        public void setAxisService​(AxisService axisService)
                            throws AxisFault
        Configure the ServiceClient to interact with the Web service described by the specified AxisService object.
        Parameters:
        axisService - the AxisService that represents the new Web service.
        Throws:
        AxisFault - if an error occurs while configuring the ServiceClient.